Smaller version of a series of endpoint high-voltage transformers. Secondary is wound with 2500 turns of number 22 wire good for over 50mA. Output voltage can be up to 20kV pk (40kV peak-to-peak) and is completely potted with a hard epoxy shell. The core is a beefy 58 x 29 x 15 mm. Magnetics ferrite type P.

A primary winding of Litz wire for a push-pull 12V input is also on the transformer and can be easily removed or changed for your particular application. This transformer is used in our PVM12 and TCL50 high-voltage high-frequency products, as well as our PTG plasma generator.

• Primary inductance L = 10uH each side of center tap. Voltamp = 75 to 150VA.
• Secondary inductance = 1H depending on airgap.