|These are paper plans, requiring parts and assembly (also available as downloadable plans for roughly half the price).|
The IOGHP10 has an output of 100kv+/meter.
Your ion ray gun and ion motor demonstrates an interesting phenomenon involving the mobility of charged particles. It is capable of producing the following effects:
Conduct Many Bizarre And Interesting Experiments!
The IOGHP10 high powered unit uses a variable duty cycle clocked oscillator driving a FET field effect transistor in turn switching into a resonant transformer. The transformer output is fed to a full wave voltage consisting of a number of stages that convert and multiply the peak value of the voltage waveform. Out put resistors help control the high capacitive discharge currents that could damage the multiplier section. Adjustable output with reactance limited current is open and short circuit protected.
Unit is housed in a combination gray PVC and clear plastic tubing enclosing the multiplier section. Controls are safety switch and charge field intensity adjustment with push button power control mounted in the pistol grip butt. This section also houses the 8 "AA" battery cell holder and has a strip of conductive metal tape to make contact to the users hand. This forces the users body to the system ground and provides a virtual ground for charge return. Unit is ruggedly built and can be hazardous if used incorrectly. Labeled dangerous.
Hazard Warning: Do not use these ion devices in an "explosive atmosphere" such as around paint fumes, gas, glue fumes, or any other potentially ignitable environment.