Loading... Please wait...


Our Newsletter

Induction Heater for Electrodes (220VAC Input)

  • Image 1
  • Image 2
Calculated at checkout

Product Description

This induction heater is capable of heating metals to over 1500 degrees F. It can be used in the processing of gas discharge tubes often used for plasma, neon displays, laser discharge tubes, spectrum tubes, etc. Output power of the heating element is approximately 150W with an operating frequency of about 50kHz, and is intended for intermittent use of up to about 30 seconds heating at a time. This unit is not intended for high-volume industrial production, as the MOSFETs will overheat under extended use. (Users may choose to experiment with oversized heatsinks and active cooling of the MOSFETs, but this is not recommended and not covered by our warranty.)

This is the 220VAC version for international use.

IND50 Instructions

  • Heats Through Glass Tubing Without Contact, Cleaning And Out Gassing Electrode
  • Two Parts Construction Consists Of Donut Shaped Head That Fits Over Electrode
  • Head Is Easily Replaced for Other Sizes of Tubing
  • Compact 4 x 5 x 2" With 3-Wire Line Cord
  • Includes HEAD58 (5/8" Insertion Hole for Glass 10-13mm)
  • Operates From 220VAC for international use


Several different-sized heads are available for use with the IND50:

HEAD12 - 1/2" Insertion Hole (1-1/2" outer diameter) for Glass up to 10mm
**HEAD58 - 5/8" Insertion Hole (1-1/2" outer diameter) for Glass 10-13mm
HEAD34 - 3/4" Insertion Hole (1-1/2" outer diameter) for Glass 13-17mm
HEAD78 - 7/8" Insertion Hole (1-3/4" outer diameter) for Glass 17-21mm
HEAD100 - 1" Insertion Hole (1-7/8" outer diameter) for Glass 21-25mm

**Included with IND50

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!