A 10-stage Marx generator built of ten 10nf per stage provides 1nf of erected capacitance. This section is built into a pressure chamber of 210mm diameter & 2500mm length. The Marx generator is fed by a three-stage high voltage power supply with an input of 230 volts 50/60Hz. This D.C. to D.C. converter generates 0 to 20kV DC which is fed to the Marx input for charging the capacitors.
|These are downloadable instructions, requiring parts and assembly.|
The Marx output of 90kV to 160kV pulse is fed to a peaking capacitor of 30pf to 180pf for shaping the pulse. The output peaking gap is fixed to shape the pulse further. The Marx now charges the output capacitor. This capacitor (coaxial oil filled capacitor) discharges into the load through the peaking gap. The entire system is coaxial made further enhancing the effectiveness.
The EMP pulser with a special Antenna is capable of shutting down a computer at a distance of 15 meters. It generates a steep 2 nanosecond rise time >2 Giga-watt pulse into a parallel plate transmission line type of Antenna.
The "EMP Blaster Gun" is suitable for many small experiments requiring radiating EMP waves. The system utilizes a high voltage discharge of 100Kv to 160Kv at a pulse repetitive rate of 1pps. It can also ignite highly explosive fuels in case of proximity or contact.
When fixed with a parallel plate antenna, even of mismatched impedance, about 15Kv / meter are produced at a distance of 2 meters (with a generated voltage of 160Kv output). With a coaxial design, the radiated waveform will have a rise time of under 50 nanoseconds, and a field strength of 15 to 30Kv / meter at distance of 1 to 2 meters.
Please note that the system will fail if operated into a short circuit.
|General specifications for the "EMP Blaster Gun" are as follows: