Below are the available bulk discount rates for each individual item when you purchase a certain amount
These low powered devices may be used with 12V battery or solar applications. They are short circuit proof and suitable for capacitor charging without a current limiting resistor. They may also be used as low power high voltage power supplies.
An affordable virtually indestructible source of high voltage for the hobbyist and professional. Now be able to experiment with continuous high voltage spark discharges, negative or positive ion generation, high speed ion propulsion motors, capacitor charging, animal and pest control, shocking applications, night vision power supplies, powering Crookes tubes, Geiger tubes, material testing, corona and Saint Elmo's fire, static generation, flocking devices, ion ray guns, etc.
Produces 25kV open circuit with a short circuit current of less than 1ma, providing a reasonably save high voltage source. Load line is set favorable to ion emitting devices. Circuit has built in open and full short circuit protection and can operate at full output indefinitely. Operation is from any 12 volt 2 amp DC regulated wall adapter, battery or converter (a 12VDC regulated adapter is included which runs off standard 115VAC wall power, and automatically converts to 230VAC for overseas customers). Dimensions are 6" L x 7" H x 2" W.
This device is best-suited for use with our ceramic capacitors or similar (taking care to not overcharge the smaller capacitors). For charging our photo flash and electrolytic capacitors (or similar), the CHARGE800V is better suited.
An external voltmeter is required to monitor charge. Small value capacitors must be charged by quickly applying power, as voltage value can be easily exceeded.
Device is basically a two part system consisting of a high voltage high frequency power supply connected into our five stage open multiplier allowing tap downs in 5 kV increments. Normally such a product would cost many times more than our asking price.
Please contact us for volume purchases.
|This item is assembled and ready to use with positive (+) output.
It is also available as a kit with plans and all parts, requiring assembly.
Or as plans (paper or downloadable versions), with parts and assembly required.
Intended for the production of negative ions, suitable for safe high voltage products.
YD-010SD1-1: Input is 12VDC at 400mA. Output is -20kV open circuit at 150 uamps. Enclosed in a 3 x 1.4 x 1.25" potted box.
YD-015SD30N: Input is 12VDC at 300mA. Output is -30kV open circuit at 80 uamps. Enclosed in a 2.5x2x1.25" potted box.
Posted by Unknown on 1st Aug 2020
This supply furnishes the best value for my limited research dollars, as everything is out in the open where I can see what's going on. The mechanics are rugged enough to use while not wasting money on fancy enclosures. Good job for Info Unlimited in finding a use for solid-state neon-sign power supplies that can be used for this kind of application.