PO Box 716, Amherst, NH 03031-0716

UV Laser Systems

Blue | Green | Red | Yellow | IR | UV | Q-Switch | RGB

To order, click the ITEM NUMBER to add to your shopping cart.

Please note: the prices of laser systems fluctuate (usually decreasing), so it's often good to call or email us for the latest prices before ordering -- chances are that the actual selling price will be lower than shown.

UV-F-355

Laser Diode Pumped CW 355nm Ultraviolet 1~20 milliwatts

All solid state 355nm UV lasers feature ultra compact construction, long lifetimes, low costs, and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, fluorescing materials, laser rapid modeling, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.

Green Laser Systems
Laser Warning Class 3B

Wavelength: 355±1 nm
Output power: 1-20 mW
Analog/TTL Modulation: 2-30khz
Power stability: < 10% (rms, over 4 hours)
FDA Classification: Class 3A
Transverse mode: near TEM₀₀
Operating mode: CW
Warm up time: < 10 minutes
M² factor: < 2.0
Beam parameters: ellipictal (4:1), Beam spot~2mm
Beam divergence, full angle: < 1.5 mrad
Beam diameter at aperture: ~3.0 mm
Beam height from base: 45 mm
Spectral linewidth: < 0.1 nm
Polarization ratio: > 50:1
Point Stability after warm up: < 0.05
Operating temperature: 10-35 C
Expected lifetime: 10,000 hours
Laser head dimensions: 211L x 88W x 74H mm, wgt 1.47kg
Power supply dimensions: 238L x 146W x 94H mm, wgt 2.88 kg
Power supply: 80-260 vac
Warranty time: 1 year

Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote: Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $300).

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

UVF355-1 - 1mw, 10% power stability, no modulation ...................$4158.00
UVF355-3 - 3mw, 10% power stability, no modulation ...................$6048.00
UVF355-5 - 5mw, 10% power stability, no modulation ...................$7938.00
UVF355-10 - 10mw, 10% power stability, no modulation ..............$9828.00
UVF355-20 - 20mw, 10% power stability, no modulation ............$11718.00

MPL-F-355

Pulsed Laser

Laser Diode Pumped Pulsed Ultraviolet 1-50 milliwatts

All solid state 355nm UV lasers feature ultra compact construction, long lifetimes, low cost, and easy operation. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments.

Green Laser Systems
Laser Warning Class 3B

Wavelength: 355±1 nm
Output power: 1-50 mW
Power stability: < 10%, < 5% (rms, over 4 hours)
FDA Classification: Class 3B
Transverse mode: near TEM₀₀
Operating mode: Frequency conversion of Q switched pulsed lase
Single pulse energy: 0.1 - 15 uJ
Pulse duration: ~10 ns
Peak power: ~10 W
Rep rate (kHz)
Controllable fixed and stable 1k,2k, 3k, 4k, 5k
TTL input for ranges in between.
Uncontrollable and undefined 5-7kHz suitable for
applications requiring high power pulses.
Warm up time: < 10 minutes
Beam parameters: Ellipictal (4:1), Beam spot ~2 mm
Beam height from base: 45 mm
Polarization ratio: > 100:1
Point Stability after warm up: < 0.05
Operating temperature: 10-35 C
Expected lifetime: 10,000 hours
Laser head dimensions: 211L x 88W x 74H mm, wgt 1.47kg
Power supply dimensions: 238L x 146W x 94H mm, wgt 2.88 kg
Power supply: 80-260 vac
Warranty time: 1 year
Remarks: Please note that because of the walk-off effect of nonlinear crystals, the beam quality of this UV laser is not as good as that of the 1064/532nm lasers.

Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote: Power Supply: this laser comes with an FDA power supply. The OEM and LED power supplies are not available for this system.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

MPLF355-10-10 - 10mw, 10% power stability, no modulation ...................$4590.00
MPLF355-20-10 - 20mw, 10% power stability, no modulation ...................$7830.00
MPLF355-30-10 - 30mw, 10% power stability, no modulation ...................$7965.00
MPLF355-50-10 - 50mw, 10% power stability, no modulation ...................$8127.00
MPLF355-100-10 - 100mw, 10% power stability, no modulation ............$11745.00

MPL-W-355

Pulsed Laser

Laser Diode Pumped Pulsed Ultraviolet Lasers 100-800 milliwatts

All solid state 355nm UV lasers feature ultra compact construction, long lifetime, low cost, and easy operation. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments, etc.

Laser Warning Class 3B

Wavelength: 355±1 nm
Output power: 100-800 mW
Power stability: <10%, <5% (rms, over 4 hours)
FDA Classification: Class 4
Transverse mode: near TEM₀₀
Operating mode: Frequency conversion of Q switched pulsed lase
Single pulse energy: 5-50uJ
Pulse duration: ~15 ns
Peak power: ~600 W
Rep rate (kHz)
Undefined rep rate around 5k-20khz and unstable.
Suitable for application only requiring high peak power pulses
Average power (mW) = single pulse energy (uJ) * rep rate (kHz)
Warm up time: < 15 minutes
Beam parameters: Ellipictal (4:1), Beam spot ~2 mm
Beam height from base: 93.5 mm
Polarization ratio: > 100:1
Point Stability after warm up: < .05
Operating temperature: 10-35 C
Expected lifetime: 8,000 hours
Laser head dimensions: 333L x 140W x 125H mm, wgt 8kg
Power supply dimensions: 307L x 168W x 123H mm, wgt 10kg
Power supply: 110 or 220 vac
Warranty time: 1 year

Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote: Power Supply: this laser comes standard with an FDA power supply. The OEM and LED power supplies are not available for this laser system.

Please note that because of the WALK ON EFFECT of non linear crystals, the beam quality is not as good as the 532nm or 1064nm systems.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

MPLW355-200-10 - 200mw, 10% power stability, no modulation ...................$14560.00
MPLW355-300-10 - 300mw, 10% power stability, no modulation ...................$15470.00
MPLW355-500-10 - 500mw, 10% power stability, no modulation ...................$19110.00
MPLW355-800-10 - 800mw, 10% power stability, no modulation ...................$26390.00
MPLW355-1000-10 - 1000mw, 10% power stability, no modulation ..............$27300.00

MPL-F-266

Pulsed Laser

Laser Diode Pumped Pulsed Ultraviolet 1-50 milliwatts

All solid state 266nm UV lasers feature ultra compact construction, long lifetime, low cost, and easy operation. Lasers are used in UV curing, CD carving, laser medical treatment, fluorescing materials, laser rapid modeling, spectrum analysis, chip inspection, physics experiments, etc.

Green Laser Systems
Laser Warning Class 3B

Wavelength: 266±1 nm
Output power: 1-30 mW
Power stability: <10%, <5% (rms, over 4 hours)
FDA Classification: Class 3B
Transverse mode: near TEM₀₀
Operating mode: Frequency conversion of Q switched pulsed lase
Single pulse energy: 0.1 - 4uJ
Pulse duration: ~10 ns
Peak power: ~10 W
Rep rate (kHz)
Controllable: fixed rep. rate (1k, 2k, 3k, 4k, 5k) with stable laser pulses (stable pulse energy, peak, duration and period). 1-5 kHz by external TTL signal.
Uncontrollable: undefined rep. rate among 5-7kHz and unstable laser pulses. Suitable for applications only requiring high peak power pulses.
Warm up time: < 15 minutes
Beam parameters: ellipictal (4:1), Beam spot ~2 mm
Beam height from base: 45 mm
Polarization ratio: > 100:1
Point Stability after warm up: < 0.05
Operating temperature: 10-35 C
Expected lifetime: 10,000 hours
Laser head dimensions: 211L x 88W x 74H mm, wgt 1.47kg
Power supply dimensions: 238L x 146W x 94H mm, wgt 2.88 kg
Power supply: 80-260 vac
Warranty time: 1 year

Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote: Power Supply: this laser comes with an FDA power supply. The OEM and LED power supplies are not available for this system.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

MPLF266-3-10 - 3mw, 10% power stability, no modulation ........................$4158.00
MPLF266-5-10 - 5mw, 10% power stability, no modulation ........................$4536.00
MPLF266-10-10 - 10mw, 10% power stability, no modulation ...................$5859.00
MPLF266-20-10 - 20mw, 10% power stability, no modulation ...................$7749.00
MPLF266-30-10 - 30mw, 10% power stability, no modulation .................$11718.00

MPL-W-266

Pulsed Laser

Laser Diode Pumped Pulsed Ultraviolet 50-200 milliwatts

Laser Warning Class 3B

Wavelength: 266±1 nm
Output power: 50-200 mw
Power stability: <10%, <5% (rms, over 4 hours)
Transverse mode: Near TEM₀₀
Operating mode: Frequency conversion of Q switched pulsed lase
Single pulse energy: ~8
Pulse duration: ~15 ns
Peak power: ~450 W
Rep rate (kHz)
Undefined rep rate around 5k-20khz and unstable. Suitable for
application only requiring high peak power pulses
Average power (mW) = single pulse energy (uJ) * rep rate (kHz)
Warm up time: < 15 minutes
Beam parameters: ellipictal (4:1), Beam spot~2mm
Beam height from base: 93.5 mm
Polarization ratio: > 100:1
Point Stability after warm up: < 0.05
Operating temperature: 10-35 C
Expected lifetime: 8,000 hours
Laser head dimensions: 333L x 140W x 125H mm, wgt 8kg
Power supply dimensions: 307L x 168W x 123H mm, wgt 10 kg
Power supply: 110 or 220 vac
Warranty time: 1 year

Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote: Power Supply: this laser comes standard with an FDA power supply. The OEM and LED power supplies are not available for this laser system.

Please note that because of the WALK ON EFFECT of non linear crystals, the beam quality is not as good as the 532nm or 1064nm systems.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

MPLW266-50-10 - 50mw, 10% power stability, no modulation ....................$18200.00
MPLW266-100-10 - 100mw, 10% power stability, no modulation ...............$20200.00
MPLW266-150-10 - 150mw, 10% power stability, no modulation ...............$22750.00
MPLW266-200-10 - 200mw, 10% power stability, no modulation ...............$26390.00

Orders: 603-673-6493 | Fax: 603-672-5406 | Inquiries: Email Contact

Please direct inquiries and technical questions/assistance through email; you should get a response within 1 business day.
But before you do this, read the item description completely. Chances are good that you'll find the answers there.

PO Box 716, Amherst, NH 03031-0716