noback.gif Red Laser Systems

Ultraviolet
266-355nm 		| Blue
457-73nm 		| Green
532nm 		| Yellow
556-93nm 		| Red
635-71nm 		| Infrared
808-1444nm 		| Q-Switch
532-1319nm 		| RGB
multi-color
Home | New Products | Gift Ideas | Plans | Xformer/Coil Mfr | Eng & Design Svcs | Policies | Contact Us

Cart Help   View Cart

To order: click the ITEM NUMBER
to add to your shopping cart

Please note: these laser systems are made to order and will take a few weeks to build,
depending on the complexity of the specifications you require.

MRL-III-635 SERIES
Temperature Stable Devices

Red Diode Laser
Temperature Stable 100-500 milliwatts

Diode red laser at 635nm featuring a long lifetime, low cost, and easy operation. These lasers are used in measuring, spectrum analysis, physics experiments, etc. Excellent for laser light shows.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 635nm
  • Output power: 100-500 mW
  • Power stability: <1%,<3%,<5% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 5 minutes
  • M2 factor: < 20
  • Beam divergence, full angle: < 3.0 mrad
  • Beam diameter at aperture: ~6.0mm (more square than round)
  • Beam height from base: 24.8mm
  • Polarization ratio: > 50:1
  • Point stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 130L x 36W x 40H mm, wgt 0.44 kg
  • Power supply dims: varies by model
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLIII635-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
5% power stability, no modulation
MRLIII635-100-5 - 100mw .....$751.00
MRLIII635-200-5 - 200mw .....$751.00
MRLIII635-300-5 - 300mw .....$786.00
MRLIII635-400-5 - 400mw .....$947.00
MRLIII635-500-5 - 500mw ...$1045.00
3% power stability, no modulation
MRLIII635-100-3 - 100mw .....$947.00
MRLIII635-200-3 - 200mw .....$947.00
MRLIII635-300-3 - 300mw .....$982.00
MRLIII635-400-3 - 400mw ...$1289.00
MRLIII635-500-3 - 500mw ...$1387.00
1% power stability, no modulation
MRLIII635-100-1 - 100mw ...$1343.00
MRLIII635-200-1 - 200mw ...$1343.00
MRLIII635-300-1 - 300mw ...$1324.00
MRLIII635-400-1 - 400mw ...$1623.00
MRLIII635-500-1 - 500mw ...$1717.00

MRL-III-635 SERIES (round beam)
Temperature Stable Devices

Diode Pumped Solid State (DPSS) Red Laser
Temperature Stable, Round Beam 50-150mw Red Laser

Diode red laser at 635nm featuring a long lifetime, low cost, and easy operation. These lasers are used in measuring, spectrum analysis, physics experiments, etc. Excellent for laser light shows.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 635nm
  • Output power: 50-150 mW
  • Power stability: <1%,<3%,<5% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • Energy distribution: Even
  • Beam spot: Round
  • Operating mode: CW
  • Warm up time: < 5 minutes
  • Beam divergence, full angle: < 8.0 mrad
  • Beam diameter at aperture: ~2.0mm
  • Beam height from base: 24.8mm
  • Polarization ratio: > 50:1
  • Point stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 141L x 73W x 46H mm, wgt 0.6 kg
  • Power supply dims: varies by model
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLIII635R-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
5% power stability, no modulation
MRLIII635R-50-5 - 50mw .......$1656.50
MRLIII635R-100-5 - 100mw ...$1751.00
MRLIII635R-150-5 - 150mw ...$2457.00
3% power stability, no modulation
MRLIII635R-50-3 - 50mw .......$1940.00
MRLIII635R-100-3 - 100mw ...$2034.50
MRLIII635R-150-3 - 150mw ...$2835.00
1% power stability, no modulation
MRLIII635R-50-1 - 50mw .......$2835.00
MRLIII635R-100-1 - 100mw ...$3037.50
MRLIII635R-150-1 - 150mw ...$3780.00

MRL-III-FS-635 SERIES
Temperature Stable Devices

Red Diode Laser
Temperature Stable 500-1000 milliwatts

Diode red laser at 635nm featuring a long lifetime, low cost, and easy operation. These lasers are used in measuring, spectrum analysis, physics experiments, etc. Excellent for laser light shows.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 4

  • Wavelength: 635±5nm
  • Output power: 500-1000mW
  • Power stability: <1%, <3%,<5% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • FDA Classification: Class 4
  • Transverse mode: near TE00
  • Operating mode: CW
  • Warm up time: < 5 minutes
  • M2 factor: < 20
  • Beam divergence, full angle: < 3.0 mrad
  • Beam diameter at aperture: ~8.0mm (more square than round)
  • Beam height from base: 28.5mm
  • Polarization ratio: > 50:1
  • Point stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 140 L x 73W x 50 H mm, wgt .65 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLIIIFS635-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
5% power stability, no modulation
MRLIIIFS635-600-5 - 600mw ........$1562.00
MRLIIIFS635-800-5 - 800mw ........$2268.00
MRLIIIFS635-1000-5 - 1000mw ...$2835.00
3% power stability, no modulation
MRLIIIFS635-600-3 - 600mw ........$1940.00
MRLIIIFS635-800-3 - 800mw ........$2835.00
MRLIIIFS635-1000-3 - 1000mw ...$3402.00
1% power stability, no modulation
MRLIIIFS635-600-1 - 600mw ........$2268.00
MRLIIIFS635-800-1 - 800mw ........$3402.00
MRLIIIFS635-1000-1 - 1000mw ...$3780.00

MRL-III-655 SERIES
Temperature Stable Devices

Red Diode Laser
Temperature Stable 100-1000 milliwatts

Diode red laser at 635nm featuring a long lifetime, low cost, and easy operation. These lasers are used in measuring, spectrum analysis, physics experiments, etc. Excellent for laser light shows.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Red Laser Systems
Laser Warning Class 4

  • Wavelength: 655nm±10
  • Output power: 100-1000mW
  • Power stability: <3%, <5%, <10% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • FDA Classification: Class 4
  • Transverse mode: Near TE00
  • Operating mode: CW
  • Warm up time: < 5 minutes
  • M2 factor: < 20
  • Beam divergence, full angle: < 3.0 mrad
  • Beam diameter at aperture: ~5x8mm
  • Beam height from base: 24.8mm
  • Polarization ratio: > 50:1
  • Point stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 130L x 36W x 40H mm, wgt 0.44 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLIII655-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
5% power stability, no modulation
MRLIII655-100-5 - 100mw .........$499.00
MRLIII655-200-5 - 200mw .........$550.00
MRLIII655-300-5 - 300mw .........$625.00
MRLIII655-400-5 - 400mw .........$700.00
MRLIII655-500-5 - 500mw .........$899.00
MRLIII655-1000-5 - 1000mw ....$849.00
3% power stability, no modulation
MRLIII655-100-3 - 100mw ...........$550.00
MRLIII655-200-3 - 200mw ...........$640.00
MRLIII655-300-3 - 300mw ...........$730.00
MRLIII655-400-3 - 400mw ...........$820.00
MRLIII655-500-3 - 500mw .........$1000.00
MRLIII655-1000-3 - 1000mw ....$1045.00
1% power stability, no modulation
MRLIII655-100-1 - 100mw ...........$947.00
MRLIII655-200-1 - 200mw ...........$968.00
MRLIII655-300-1 - 300mw ...........$982.00
MRLIII655-400-1 - 400mw .........$1010.00
MRLIII655-500-1 - 500mw .........$1289.00
MRLIII655-1000-1 - 1000mw ....$1387.00

MRL-III-655 SERIES (round beam)
Temperature Stable Devices

Red Diode Laser
Round Beam, Temperature Stable 1-200 milliwatts

Diode red laser at 635nm featuring a long lifetime, low cost, and easy operation. These lasers are used in measuring, spectrum analysis, physics experiments, etc. Excellent for laser light shows.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Red Laser Systems
Laser Warning Class 4

  • Wavelength: 655nm±10
  • Output power: 1-200mW
  • Power stability: <1%, <3%, <5% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • Energy Distribution: Even
  • Beam Spot: Round
  • Operating mode: CW
  • Warm up time: < 5 minutes
  • Beam divergence, full angle: < 8.0 mrad
  • Beam diameter at aperture: ~2.0mm
  • Beam height from base: 24.8mm
  • Polarization ratio: > 50:1
  • Point stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 130L x 36W x 40H mm, wgt 0.44 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLIII655R-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
5% power stability, no modulation
1mw to 100mw = $1512
MRLIII655R-100-5 - 100mw ....$1562.00
MRLIII655R-150-5 - 200mw ....$2457.00
MRLIII655R-200-5 - 200mw ....$2646.00
3% power stability, no modulation
1mw to 100mw = $2268
MRLIII655R-100-3 - 100mw ....$2268.00
MRLIII655R-150-3 - 200mw ....$2835.00
MRLIII655R-200-3 - 200mw ....$3402.00
1% power stability, no modulation
1mw to 100mw = $3402
MRLIII655R-100-1 - 100mw ....$3402.00
MRLIII655R-150-1 - 200mw ....$4158.00
MRLIII655R-200-1 - 200mw ....$4536.00

MRL-III-671 SERIES
Temperature Stable Devices

Diode Pumped Solid State (DPSS) Red Laser
Temperature Stable 1-300 milliwatts

All solid state 671nm red lasers feature ultra compact construction, long lifetimes, low cost and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 1-300mW
  • Power stability: <3%, <5%, <10% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • FDA Classification: Class 3B
  • Transverse mode: TEM00
  • Operating mode: CW
  • Warm up time: < 10 minutes
  • M2 factor: < 1.2
  • Beam divergence, full angle: < 1.5 mrad
  • Beam diameter at aperture: ~2.0mm
  • Beam height from base: 24.8mm
  • Polarization ratio: > 100:1 (0 or 90 degrees)
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 142L x 73W x 46H mm, wgt 0.645 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRL671-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $200).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $200 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MRLIII671-100-10 - 100mw .......$590.00
MRLIII671-200-10 - 200mw .......$688.00
MRLIII671-300-10 - 300mw ....$1080.00
5% power stability, no modulation
MRLIII671-100-5 - 100mw .....$884.00
MRLIII671-200-5 - 200mw .....$982.00
MRLIII671-300-5 - 300mw ...$1422.00
3% power stability, no modulation
MRLIII671-100-3 - 100mw ....$1226.00
MRLIII671-200-3 - 200mw ....$1324.00
MRLIII671-300-3 - 300mw ....$1751.00
1% power stability, no modulation
MRLIII671-100-1 - 100mw ....$1562.00
MRLIII671-200-1 - 200mw ....$1656.50
MRLIII671-300-1 - 300mw ....$2646.00

MSL-III-671 SERIES
Single Longitudinal

Diode Pumped Solid State (DPSS) Red Laser
1-50 milliwatts

All solid state 671nm red lasers feature ultra compact construction, long lifetimes, low cost and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser FDA PSU OEM PSU
Laser Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671nm
  • Output power: 1-50mW
  • Power stability: <1%, <3%, <5% (rms, over 4 hrs)
  • Transverse mode: TEM00
  • Operating mode: CW
  • Warm up time: < 15 minutes
  • M2 factor: < 1.2
  • Beam divergence, full angle: < 1.5 mrad
  • Beam diameter at aperture: ~2.0mm
  • Beam height from base: 24.8mm
  • Spectral linewidth: < 0.0001
  • Polarization ratio: > 50:1 (45 degrees)
  • Pointing stability after warmup: < 0.05 mrad
  • Noise of amplitude: <0.5% (rms, 1~20MHz)
  • Coherent length: > 50 meters
  • Operating temperature: 15-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 142L x 73W x 46H mm, wgt 0.645 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MSLIII671- -0
Power Supply: this laser comes standard with an FDA power supply. If you would like the OEM power supply (at no price difference), please let us know in the special instructions of your order.

Power Control: not available with MSL (single longitudinal) lasers.

Modulation: not available for MSL (single longitudinal) lasers.

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!

5% power stability, no modulation
MSLIII671-3-5 - 3mw ........$3024.00
MSLIII671-5-5 - 5mw ........$3213.00
MSLIII671-10-5 - 10mw ...$3402.00
MSLIII671-30-5 - 30mw ...$4914.00
MSLIII671-50-5 - 50mw ...$6804.00
3% power stability, no modulation
MSLIII671-3-3 - 3mw ........$4158.00
MSLIII671-5-3 - 5mw ........$4347.00
MSLIII671-10-3 - 10mw ...$4536.00
MSLIII671-30-3 - 30mw ...$6048.00
MSLIII671-50-3 - 50mw ...$7938.00

MRL-H-671 SERIES
Temperature Stable Devices

Diode Pumped Solid State (DPSS) Red Laser
Temperature Stable 500-1000 milliwatts

All solid-state 671nm red lasers feature ultra compact construction, long lifetimes, low costs, and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, instrument, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 500-1000mW
  • Power stability: <1%, <3%, <5%, <10% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • Transverse mode: Near TEM00
  • Operating mode: CW
  • Warm up time: < 15 minutes
  • M2 factor: < 2
  • Beam divergence, full angle: < 2 mrad
  • Beam diameter at aperture: ~3.0mm
  • Beam height from base: 29mm
  • Polarization ratio: > 100:1
  • Point Stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 155L x 77W x 60H mm, wgt 0.86 kg
  • Power supply dims: 238L x 146W x 94H mm, wgt 2.88 kg
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLH671-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $400).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $400 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MRLH671-500-10 - 500mw ........$1562.00
MRLH671-800-10 - 800mw ........$1940.00
MRLH671-1000-10 - 1000mw ...$2835.00
5% power stability, no modulation
MRLH671-500-5 - 500mw ........$2362.00
MRLH671-800-5 - 800mw ........$2551.00
MRLH671-1000-5 - 1000mw ...$3402.00
3% power stability, no modulation
MRLH671-500-3 - 500mw ........$2929.00
MRLH671-800-3 - 800mw ........$3118.00
MRLH671-1000-3 - 1000mw ...$3780.00
1% power stability, no modulation
MRLH671-500-1 - 500mw ........$3496.00
MRLH671-800-1 - 800mw ........$3780.00
MRLH671-1000-1 - 1000mw ...$4158.00

MRL-F-671 SERIES
Temperature Stable Devices

Diode Pumped Solid State (DPSS) Red Laser
Temperature Stable 1500-1800 milliwatts

All solid state 671nm red lasers feature ultra compact construction, long lifetimes, low costs, and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, instrument, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, laser light shows, etc.
Red Laser Systems

Laser FDA PSU Dimensions FDA PSU OEM PSU
Laser Dimensions FDA PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 1500-1800mW
  • Power stability: <1%, <3%, <5%, <10% (rms, over 4 hrs)
  • TTL modulation: 2-30 kHz
  • Analog modulation: 2-30 kHz
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 10 minutes
  • M2 factor: < 2
  • Beam divergence, full angle: < 2 mrad
  • Beam diameter at aperture: ~3.0 mm
  • Beam height from base: 45 mm
  • Polarization ratio: > 100:1
  • Point Stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 211L x 88W x 74H mm, wgt 1.47kg
  • Power supply dims: 238L x 146W x 94H mm, wgt 2.88 kg
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLF671-
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $400).

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $400 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MRLF671-1500-10 - 1500mw ...$4725.00
5% power stability, no modulation
MRLF671-1500-5 - 1500mw ...$5670.00
3% power stability, no modulation
MRLF671-1500-3 - 1500mw ...$6615.00
1% power stability, no modulation
MRLF671-1500-1 - 1500mw ...$7560.00

MRL-W-671 SERIES
Temperature Stable Devices

Diode Pumped Solid State (DPSS) Red Laser
Temperature Stable 2000-4500 milliwatts

All solid-state 671nm red lasers feature ultra compact construction, long lifetimes, low costs, and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, laser light shows, etc.
Red Laser Systems

Laser LED PSU FDA PSU
PSU PSU PSU

Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 2000-4500mW
  • Power stability: <1%, <3%, <5%, <10% (rms, over 4 hrs)
  • TTL modulation: Optional, 2-30 kHz
  • Analog modulation: Optional, 2-30 kHz
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 10 minutes
  • M2 factor: < 2
  • Beam divergence, full angle: < 2 mrad
  • Beam diameter at aperture: ~4.0 mm
  • Beam height from base: 93.5 mm
  • Polarization ratio: > 100:1
  • Point Stability after warm up: < 0.05 mrad
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 333L x 140W x 125H mm, wgt 8 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MRLW671-
Power Supply: this laser comes standard with an FDA power supply. If you would like the LED power supply (additional $700), please let us know in the special instructions of your order. The OEM power supply is not available for this laser system.

Power Control: if you need to adjust the laser’s output power, a power control dial is available for an extra $700 (note that the LED power supply already includes this dial). The dial is not available at 5/3/1% power stability.

Modulation: TTL/Analog modulation is available up to 10kHz at no extra charge. Add 10% to price for modulation above 10kHz. Analog modulation not available at 5/3/1% power stability (TTL available at all power stabilities).

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MRLW671-3000-10 - 3000mw ...$12285.00
MRLW671-4000-10 - 4000mw ...$15470.00
5% power stability, no modulation
MRLW671-3000-5 - 3000mw ...$15470.00
MRLW671-3000-5 - 3000mw ...$19110.00
3% power stability, no modulation
MRLW671-3000-3 - 3000mw ...$19110.00
MRLW671-3000-3 - 3000mw ...$22750.00
1% power stability, no modulation
MRLW671-3000-1 - 3000mw ...$22750.00
MRLW671-3000-1 - 3000mw ...$26390.00

MLL-III-671 SERIES
Low Noise

Diode Pumped Solid State (DPSS) Red Laser
1-300 milliwatts

All solid-state 671nm red lasers feature ultra compact construction, long lifetimes, low cost and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser FDA PSU OEM PSU
Laser Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 1-300mW
  • Power stability: <1%, <3%, <5% (rms, over 4 hrs)
  • Modulation: not available for MLL lasers
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 15 minutes
  • M2 factor: < 1.2
  • Beam divergence, full angle: < 1.5 mrad
  • Beam diameter at aperture: ~2.0 mm
  • Beam height from base: 24.8 mm
  • Polarization ratio: > 100:1 (0 or 90 degrees)
  • Noise amplitude: < 1% (rms, 1~20MHz)
  • Pointing stability: < 0.05 (mrad, after warm-up)
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 142L x 73W x 46H mm, wgt 0.645 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
  • No modulation offered
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MLLIII671- -0
Power Supply: this laser comes standard with an FDA power supply. If you would like the OEM power supply (at no change in price), please let us know in the special instructions of your order. The LED power supply is not available for this laser system.

Power Control: not available with MLL (low noise) lasers.

Modulation: not available for MLL (low noise) lasers.

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
from 1 to 100mw = $1080
MLLIII671-100-10 - 100mw ...$1080.00
MLLIII671-200-10 - 200mw ...$1128.00
MLLIII671-300-10 - 300mw ...$1422.00
5% power stability, no modulation
from 1 to 100mw = $1128
MLLIII671-100-5 - 100mw ...$1128.00
MLLIII671-200-5 - 200mw ...$1226.00
MLLIII671-300-5 - 300mw ...$1913.00
3% power stability, no modulation
from 1 to 100mw = $1643
MLLIII671-100-3 - 100mw ...$1643.00
MLLIII671-200-3 - 200mw ...$1778.00
MLLIII671-300-3 - 300mw ...$2453.00

MLL-H-671 SERIES
Low Noise

Diode Pumped Solid State (DPSS) Red Laser
500-1000 milliwatts

All solid state 671nm red lasers feature ultra compact construction, long lifetimes, low cost and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser LED PSU FDA PSU OEM PSU
Laser Dimensions LED PSU Dimensions FDA PSU Dimensions OEM PSU Dimensions

Green Laser Systems
Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 500-1000mW
  • Power stability: <1%, <3%, <5% (rms, over 4 hrs)
  • Modulation: not available for MLL lasers
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 15 minutes
  • M2 factor: < 1.2
  • Beam divergence, full angle: < 2 mrad
  • Beam diameter at aperture: ~3.0 mm
  • Beam height from base: 29 mm
  • Polarization ratio: > 100:1
  • Noise of amplitude: < 1% (rms, 1~20MHz)
  • Pointing stability: < 0.05 (mrad, after warm-up)
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 155L x 77W x 60H mm, wgt 0.86 kg
  • Power supply dims: varies
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MLLH671- -0
Power Supply: this laser comes standard with an FDA power supply. If you would like a different power supply, please let us know in the special instructions of your order (OEM is no price difference, LED is additional $400).

Power Control: not available with MLL (low noise) lasers.

Modulation: not available for MLL (low noise) lasers.

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MLLH671-500-10 - 500mw ........$2133.00
MLLH671-800-10 - 800mw ........$2646.00
MLLH671-1000-10 - 1000mw ...$3982.00
5% power stability, no modulation
MLLH671-500-5 - 500mw ........$3307.00
MLLH671-800-5 - 800mw ........$3577.00
MLLH671-1000-5 - 1000mw ...$4792.00
3% power stability, no modulation
MLLH671-500-3 - 500mw ........$4117.00
MLLH671-800-3 - 800mw ........$4387.00
MLLH671-1000-3 - 1000mw ...$5292.00

MLL-W-671 SERIES
Low Noise

Diode Pumped Solid State (DPSS) Red Laser
2000-4500 milliwatts

All solid state 671nm low-noise lasers feature ultra compact construction, long lifetimes, low cost and easy operation. Lasers are used in DNA sequencing, flow cytometry, cell sorting, optical instruments, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiments, etc.
Red Laser Systems

Laser LED PSU FDA PSU
PSU PSU PSU

Laser Warning Class 3B

  • Wavelength: 671±1nm
  • Output power: 2000-4500mW
  • Power stability: <1%, <3%, <5% (rms, over 4 hrs)
  • Modulation: not available for MLL lasers
  • Transverse mode: near TEM00
  • Operating mode: CW
  • Warm up time: < 15 minutes
  • M2 factor: < 2
  • Beam divergence, full angle: < 2 mrad
  • Beam diameter at aperture: ~4 mm
  • Beam height from base: 93.5 mm
  • Polarization ratio: > 100:1
  • Noise of amplitude: < 1% (rms, 1~20MHz)
  • Pointing stability: < 0.05 (mrad, after warm-up)
  • Operating temperature: 10-35 C
  • Expected lifetime: 10,000 hours
  • Laser head dims: 333L x 140W x 125H mm, wgt 8 kg
  • Power supply dims: 238L x 146W x 94H mm, wgt 13 kg
  • Power supply: 80-260 vac
  • Warranty time: 1 year
Additional options are highlighted in red, above. If you need a specialized configuration, please select your parameters here to receive a price quote:
       MLLW671- -0
Power Supply: this laser comes standard with an FDA power supply. If you would like the LED power supply (additional $400), please let us know in the special instructions of your order. The OEM power supply is not available for this laser system.

Power Control: not available with MLL (low noise) lasers.

Modulation: not available for MLL (low noise) lasers.

Line Optics: for <= 75° spread, add $550. For 90° spread, add $600.

Fiber Coupling: MM fiber add $450; SM fiber add $730.

Price Match: If you find this laser from a retail store for less, please let us know and we'll try to match their price or better!
10% power stability, no modulation
MLLW671-3000-10 - 3000mw ....$16575.00
MLLW671-4000-10 - 4000mw ....$21658.00
MLLW671-4500-10 - 4500mw ....$26754.00
5% power stability, no modulation
MLLW671-3000-5 - 3000mw ....$21658.00
MLLW671-4000-5 - 4000mw ....$26754.00
MLLW671-4500-5 - 4500mw ....$31850.00
3% power stability, no modulation
MLLW671-3000-3 - 3000mw ....$26754.00
MLLW671-4000-3 - 4000mw ....$31850.00
MLLW671-4500-3 - 4500mw ....$36946.00

View CartCheckout
Orders: 603-673-6493 | Fax: 603-672-5406
Email: Sales & Orders
Email: Tech Support

Please direct inquiries and technical questions/assistance through email; you should get a response within 1 business day.
But before you do this, read the item description completely. Chances are good that you'll find the answers there.

noback.gif
PO Box 716, Amherst, NH 03031-0716