Loading... Please wait...

Categories

Our Newsletter


Plasma Fire Sabers and Accessories


http://www.amazing1.com/content/Graphics/single-page-view.png

banner

 


A video demonstration of the sabers.

A Saber Practice Video.

Sound in this video is not available in the actual Plasma Fire Sabers!

Plasma Fire Sabers should never be used for jabbing, poking, or stabbing; or being thrown, swung around animals, people or personal property. They should not be worn during physical activity including jumping, running or walking down stairs. Information Unlimited accepts no liability in the misuse of its products.

SAB Series is our tooled up version of this product.
Moving light flows up the saber blade and appears to evaporate into space!! You control this amaing phenomenon by simply applying pressure to the contact prodes located on the saber handle.

 

Produce the spectacular effect that has captured the fantasies of millions. Length of visible plasma field is controlled by the position of your thumb or finger on metal strips on the handle. Sabers are available in Photon Blue, Phasor Green, Starfire Purple, Solar Yellow, Nova White, and Neon Red. Available lengths are 15", 24", and 36". Blades are also individually available. They are contained in a rugged and stiff 1/8" wall clear plastic shroud. Construction is "beefy" and very durable giving a rugged feeling. But since Plasma Fire Sabers contain glass neon tubes, they cannot be used for simulated sword play or fencing. Durability of the Plasma Fire Sabers depends on the length of the blade, thus the 15" would be the most durable and the 36" the least durable.   The owner of INFORMATION UNLIMITED INC holds the patent for this flowing light technology


The SAB sabers are complete and ready to use -- you just need to screw in the blade and connect the batteries.


Our SAB plasma saber consists of a tooled universal handle that features an override switch for steady burn and includes contact touch probes for varying the blade discharge length. The handle (11" X 2") is attractively designed and comfortable to grip and includes a wrist strap. Powered by 2 nine volt batteries (not included) that fit into the handle via a screw on cap. The electronics powers a 36" argon blade to full length with a battery voltage of less than 5 volts, providing hours of continued operation. A 36" red neon blade lights to full length at a battery voltage of 9 volts. Blades are easily changeable by a simple "screw on" action into the handle. The handle will power all size blades.

Complete Sabers
with blade and handle
- Complete Saber, w/15" Blade (choose color at checkout) ... $39.95
- Complete Saber, w/24" Blade (choose color at checkout) ... $59.95
- Complete Saber, w/36" Blade (choose color at checkout) ... $89.95


Extra Blades
complete blade units (tube, protective shroud, threaded mount) to switch between SAB-series handles for different-colored sabers!
(works with SAB15/24/36, SAB24K/36K, SABDIG1K/10, SABADP)
- 24" Blade with shroud & mount (choose color at checkout) ... $39.95
- 36" Blade with shroud & mount (choose color at checkout) ... $69.95

International Customers: international shipping may exceed $50. We will notify you of the exact international shipping costs, and will not ship your order until you have confirmed the charges. The 36" will not be shipped overseas because of its propensity to break.

- PFS Paper Plans ... $6.00
- PFS Downloadable Plans ... $3.00

Auto Light Flow Controller
This is an easy upgrade, great improvement, fits all SAB-series sabers. Touch the contact anywhere and light automatically and smoothly "flows" into the blade, compared to standard contacts that require finger movement to control the length of the blade. Release the contact and the light flows smoothly back into the handle, creating a greatly-improved visual effect.

Video Demo

Easy upgrade, great improvement, fits all SAB-series sabers. Touch the contact anywhere and light automatically and smoothly "flows" into the blade, compared to standard contacts that require finger movement to control the length of the blade. Release the contact and the light flows smoothly back into the handle, creating a greatly-improved visual effect.

- Factory Modified Handle ... Special order, please contact us to purchase
- Do It Yourself Kit ... Special order, please contact us to purchase

Tooled "Mauler" Adapter


Used to join two SAB series handles together.

- MAULER Adapter ... $39.95

PFS Series Saber Kits
These are the un-tooled versions that work as good if not better than the tooled ones. They are lighter and easy to assemble. The star warsTM fan may want to use the electronic circuitry and fashion his own handle like the movie version. They are available as kits with all parts to assemble with simple tubular handle

 

Above: PFS controllers attached to different-length neon tubes.

 

The above photo shows a SAB50 power supply attached to an NE-series blade with the entire assembly inside a 1 inch diameter polycarbonate tube (note that this clear outer tube is not included with the blades or power supply, but shown to illustrate the compact size of this power supply). The leads exiting the rear go to a power source (batteries) and to the control probes on the handle. This allows the assembler to build the stages as desired and design his own handle, which must house the battery pack, supply room enough to slide in the rear section up to the energized section of the plasma tube, and provide the mounting surfaces for the control pads. Or he may simply use the 12 x 1-5/8 black plastic tube and fittings that we supply and make a very simple looking saber assembly. The PFS-series power supply and NE-series neon tubes are for people wanting to build a more customized saber design.

Neon Tubes

The bare neon tube, clean and bright for an elegant appearance. These tubes are somewhat delicate and they do not include a protective shroud, so care should be taken when handling.

These neon tubes are excellent for matching to your own power supply and handle for a truly customized saber design.

neon glass tubes only (no shroud or mount), with bare leads at one end
note: these tubes go with the PFS board, and *NOT* the SAB-series
- 15" Blade Only, no shroud or mount (choose color at checkout) ... $19.95
- 36" Blade Only, no shroud or mount (choose color at checkout) ... $64.95

* 36" Sabers, Kits and Blades Require Priority Mail and are Shipped to USA Addresses Only. Pricing includes special packaging and handling due to large shipping size of product.

International Customers: international shipping may exceed $50. We will notify you of the exact international shipping costs, and will not ship your order until you have confirmed the charges. The 36" will not be shipped overseas because of its propensity to break.


Touch Resistant Controller

Build Your Own Fire Saber
This is the power supply for the PFS-series sabers, intended for those who want to build their own handles and housings, and add their own blade. No other parts are included with this item (blade, shroud, handle, etc) -- this is the power supply only.

PFS3E Fits Inside a 7/8" ID Enclosure
Dimensions: 3-3/4" L X 5/8" W X 3/4" H
Powers up to 36" Neon Tube

This module can be powered by:
(2) 9 Volt Alkaline Batteries connected in parallel - expect up to 5 hrs full "ON"
(1) 9 Volt Lithium Battery - expect up to 5 hrs full "ON"
(2) 9 Volt Lithium Battery connected in parallel - expect up to 8 hrs full "ON"
(1) 9 Volt NiCad Rechargeable - expect up to 1 hr full "ON"
(2) 9 Volt NiCad Rechargeable connected in parallel - expect up to 2 hrs full "ON"
(8) "AA" Batteries connected in series is recommended for a Neon Red tube, or to provide a brighter output

- Touch Resistance Controller ... $39.95
- Paper Plans ... $5.00
- Downloadable Plans ... $2.00

The following items work with both types of sabers (SAB and PFS).

Saber Recycling Stand
All New Plasma Saber Product
Convert Your Light Saber into an incredible Flowing Light Lamp!
Works with all sabers (SAB and PFS series).
Excellent illuminating special effects device for bedroom, playroom or any attention getting application. Special mounting base programs the light to flow up the saber blade appearing to evaporate into space. It then retracts back into hilt and repeats providing a spectacular visible effect. Saber is easily removed from base for normal hand held use. Works with all sizes of our SAB series lite sabers and operates continously from a 12 volt DC .2 amp wall adapter.
- Saber Recycling Stand Assembled ... $59.00
- Saber Recycling Stand Paper Plans ... $8.00
- Saber Recycling Stand Downloadable Plans ... $3.00

Saber Sound Module

sabsound


Sound Demo

Provides a changing tone as you move your saber.
Works with all sabers (SAB and PFS series).

Patented circuit emits a changing tone being totally controlled by movement of your PLASMA FIRE SABER. This is accomplished without any physical connections! Unit may be worn on belt or remotely located up to 10 feet away. May be used in conjunction with existing sound equipment. Uses 8 AA batteries and contains a built in speaker with all controls. This is a neat addition to your saber program.  Sound tone, timbre, volume is adjustable. Many internal adjustment allow unit to be very flexible with the sound quality.  Uses some of our circuit magic!!

- Ready to Use ... Special order, please contact us to purchase
- Saber Kit/plans ... Special order, please contact us to purchase
- Paper Plans ... $5.00
- Downloadable Plans ... $2.00