|
Plasma Devices
UL2161/General | 12VDC/Auto | Testers & Heaters | Plasma Devices | Fire Sabers Home | New Products | Gift Ideas | Plans | Policies | Contact Us Transformer/Coil Manufacturing | Engineering & Design Services |
To order: click the ITEM NUMBER
|
![]() |
A wearable PLASMA DISK that dances to the sounds of music and responds to your touch and light impacts. This fascinating device combines micro miniature electronics with the amazing properties of plasma physics to bring you a truly spectacular attention-getting display.
Simply clip onto belt, or put in any other convenient location. Great for parties, discos, dances, attracting attention, and stimulating conversation. Full 2.5" diameter glass display in vivid blue, green, or red/green/blue, operating for hours on two AAA batteries (not included).
CLPLDISK-BL - Blue ............$19.95
|
|
![]() ![]() ![]() |
The plasma tornado generator is an excellent demonstration of energized electrical plasma. It uses rarefied air pumped down to a vacuum of 1 mm (torr) or less and energized by a high frequency, high voltage power source. Displays range from a purple vortex shaped plasma column extending the length of the vessel to orange saucer shaped disks. Display will vary by pressure and the operating frequency of the power source providing a myriad of weird and bizarre plasma discharges. Outside influences such as a hand or finger will attract or repel the plasma vortexes further adding to the mystique of the device. Fluorescent or neon tube will mysteriously glow without any connections what so ever when bought near the display vessel.
The basic system uses our PVM12 low input voltage adjustable frequency high voltage output driver only requiring connection to one terminal of the display vessel. The other "virtual" electrode is the surrounding atmosphere with the glass walls of the container becoming the dielectric. The system is now modeled as a "lossy" capacitor. The actual rarefied air once energized by the high frequency energy becomes the loss part of the capacitor model. The driver is short circuit protected but must be connected to the display or other suitable load. Input is 12 volts DC at 3 amps and must be earth grounded for proper operation (you can use your power supply if provides these specs, or purchase our 12DC/4AR, below). The PVM12 is described in the high frequency power supply section of our website. The display vessel is shown as a one gallon pickle jar with a brass metal cap. The cap is shown reworked for connection to a vacuum pump and the high frequency driver for operation. The jar is available on special request fully pumped down and will provide a display that will change over time and is intended for those not having access to a vacuum pump.
PTG3 - Plans Only (By Download - $5.00) ...................................$8.00
**CAUTION Pumped-down jar is under a high vacuum and can be an explosion hazard if broken. It is strongly suggested to place in a heavy clear plastic bag or meshed bag like what onions are packed in. Jar is labeled explosion hazard.
![]() |
PLASMA20M |
Produces bright, colorful display even brighter than a plasma ball. Mysterious, unexplained "aura" effect. Safe 12 volt operation. Made of strong Pyrex® glass approx 1/4" thick. Available single-colors are white, red, blue, green and purple (although purple is dimmer than the other colors) -- the default is blue unless you specify otherwise, so call us or indicate in the special instructions of your order if you have a preference. Stand not included, but please contact us if you would like to have one made. Fantastic special effects prop; these were used in "Star Trek," behind the heads of the "Borgs." Also found in many bars and clubs to provide great ambience, and work just as well in your home bar or living room to give a real "wow" factor for guests.
The items listed below are a sampling of the different shapes and sizes available (in general, multi-colored devices cost 10% more than single-color devices), but please contact us for any shapes or sizes not listed, or for any further information. Or Place Your Order And We Will Advise You of Any Extra Charges. |
|
|
(Single-Color) PLASMA14S - 14" Diameter .....$364.14 PLASMA16S - 16" Diameter .....$414.54 PLASMA18S - 18" Diameter .....$437.22 PLASMA20S - 20" Diameter .....$567.00 PLASMA24S - 24" Diameter .....$860.58 PLASMA30S - 30" Diameter ...$1764.00 PLASMA36S - 36" Diameter ...$4032.00 PLASMA40S - 40" Diameter ...$3969.00 |
(Multi-Color) PLASMA14M - 14" Diameter ......$400.55 PLASMA16M - 16" Diameter ......$455.99 PLASMA18M - 18" Diameter ......$480.94 PLASMA20M - 20" Diameter ......$623.70 PLASMA24M - 24" Diameter ......$946.64 PLASMA30M - 30" Diameter ....$1940.40 PLASMA36M - 36" Diameter ....$4435.20 PLASMA40M - 40" Diameter ....$4365.90 |
(Single-Color) PLASMA-SQ-S18 - 18" x 18" .......$520.65 PLASMA-SQ-S24 - 24" x 24" .......$878.67 PLASMA-SQ-S31 - 31" x 31" .....$1949.62 |
(Single-Color) PLASMA-RT-S1224 - 12" x 24" .......$594.36 PLASMA-RT-S1824 - 18" x 24" .......$891.54 PLASMA-RT-S2436 - 24" x 36" .....$1429.87
|
|
These spectacular colorful displays provide a dazzling visual effect unlike anything seen before. Fiery fingers of energized light reach out and crash against the inner walls of the globe, creating a myriad of colorful reactions. Made of strong Pyrex® glass approx 1/4" thick, these globes are built to last.
Standard plasma color is blue; but red, pink, and purple are also available (or any combination thereof). Prices subject to change. Contact us by email or phone (603-673-6493) to discuss any color options.
|
|
|
Ready To Use Systems w/Stand and Power Supply
PGL120 - 12" Plasma System........$980.00 PGL140 - 14" Plasma System......$1730.00 PGL180 - 18" Plasma System......$3860.00 PGL220 - 22" Plasma System......$5710.00 PGL240 - 24" Plasma System......$8635.00 PGL300 - 30" Plasma System....$17835.00
|
Individual Globes For "Do It Yourselfers"
PG12 - 12" Sealed Plasma Globe........$745.00 PG14 - 14" Sealed Plasma Globe......$1495.00 PG18 - 18" Sealed Plasma Globe......$3395.00 PG22 - 22" Sealed Plasma Globe......$5195.00 PG24 - 24" Sealed Plasma Globe......$7995.00 PG30 - 30" Sealed Plasma Globe....$16995.00 ![]() |
Stands and Adjustable Output Power Supplies
PVM12 - 30W Driver for PG12 (12VDC input)..................$79.95 12DC/4AR - Wall Adapter (115vac input, 12V output)...$29.95 PVM400 - 150W Driver for 14" to 30" (115vac input)....$199.95 * PVM400-220 - for International Use (220vac input).....$199.95 * PVM400DELUX - PVM400 with Optional Features.......$249.95 * TR220 - Transformer for Int'l Use (220vac input)..........$59.95 PGSTAND14 - Plexiglass Stand for PG12, 14...............$150.00 PGSTAND22 - Plexiglass Stand for PG18, 22...............$175.00 PGSTAND24 - Plexiglass Stand for PG24......................$250.00 PGSTAND30 - Plexiglass Stand for PG30......................$400.00 *See more details in General Purpose & Professional Neon section.
|
|
|
A fantastic display of natures 4th state of matter!
These spectacular, colorful displays provide a dazzling visual effect. Fingers of blue electrified plasma writhe and snake along a length of glass tubing. A myriad of red splashes occur at the inner walls creating a truly amazing sight. Display responds to "touch" further adding to the effect. All displays require our PVM400 (not included, sold separately) variable output mode high frequency current limited driver enabling the display to be fully adjustable from a light wisp to intense activity. A safety shut down, built in, turns the display off in case a catastrophic failure, such as a broken tube, should occur and can be set to shut down even if someone just touches the display. Operation can be from either 120 or 240 VAC lines. Standard plasma color is blue; but red, pink, and purple are also available (or any combination thereof). Standard sizes are 48" lengths in diameters from 1-6". They are also available in custom sizes ranging from 24 to 96" in length, and even different shapes (please call 603-673-6493 or email us to discuss options). Diameter is measured by the outer diameter of the columns. Glass is approx 3/16" thick Pyrex® lab glass, very strong. Stand not included as these are often special installations, but we provide stands for sale if needed. Prices subject to change. Due to the special crafting of these items, please allow 3-4 weeks delivery. |
6" Wide Plasma Columns at 5 Feet Tall |
|
PLASMA148 - 1" x 48" Column .........$441.00
PLASMA248 - 2" x 48" Column .........$504.00 PLASMA348 - 3" x 48" Column .........$630.00 PLASMA448 - 4" x 48" Column .........$882.00 PLASMA548 - 5" x 48" Column........$1795.50 PLASMA648 - 6" x 48" Column........$1995.00 |
PLASMA172 - 1" x 72" Column .........$661.50
PLASMA272 - 2" x 72" Column .........$756.00 PLASMA372 - 3" x 72" Column .........$945.00 PLASMA472 - 4" x 72" Column........$1323.00 PLASMA572 - 5" x 72" Column........$2693.25 PLASMA672 - 6" x 72" Column........$2992.50 |
|
PVM400 - 115/220VAC 150W Driver.....................................$199.95 *
PVM400-220 - 220VAC for Overseas Customers............$199.95 * PVM400DELUX - PVM400 with Optional Features.............$249.95 * TR220 - Transformer for PVM400DELUX at 220V .............$59.95 PLASMASTAND48 - Stand for 48" Plasma Columns..........$99.50 PLASMASTAND72 - Stand for 72" Plasma Columns........$125.00 |
|
|
The "Audio Arc"
Similar to the JACKSING10, but more powerful. Stable arc produces louder and clearer sounds (but does not have the “rising effect” of the Jacob’s Ladder that some may prefer).
|
|
Plasma Gun and Leak DetectorProjects high frequency waves capable of igniting lights and producing energy fields without wires or contact! Excellent for testing neon or fluorescent tubes without removal from their sockets.Plasma energy emitting device is very useful for testing fluorescent and any other gas discharge lamp without removal from the socket. Simply bring the unit near the lamp and note if a glow is occurring indicating lamp is usually OK. Gun is an excellent leak detector for checking otherwise non detectable leaks in vacuum and gas systems. May also be used for animal control and conditioning where contact will produce a mild shock (use caution!). Hand held, built in a wand configuration containing batteries (not included) with a telescoping emitter probe.
PLE30 - Assembled.............$99.50 |
|
Radiant Energy Probe
and E-Field Detector
ENPROBE10 - Assembled ......$34.95 |
Probe detects E fields produced by electrical activity and other unknown anomalies. Unit uses no batteries or other sources of power yet detects very weak and virtually un-noticed energy fields. Unit can also provide a three dimensional output "footprint" of medical healing machines such as LAKHOVSKY coils, High voltage generators, Ion machines, Dangerous lightning levels, Power line E field gradients, High frequency radiation from TESLA coils and similar devices. This probe is used by paranormal researchers as seen on some TV shows.
This device is for detecting strong E fields, like those from plasma globes, tesla coils, ion generators, etc. It is not intended for weak E fields, like those generated by many household items. If you need something to detect household or weaker energy fields, we suggest our IOD10. The apparatus is electrically balanced and designed in the shape of a wand with a 2 inch brass sphere at its detecting end. The handle is 1” OD x 9” of treated polycarbonate with plated metallic tape wrapped around the ends. A red neon indicator lamp (a standard bulb that should last for years, but can easily be replaced if needed) flashes upon detection and increases as you get closer to the source, or if the source gets stronger. This handy unit is easy to use and can check the validity of output energy of various healing machines and other radiating products. It is a must-have product for those working in these energy fields.
|
High Voltage Engineering Design Services |
High Voltage Design for Research, Trade, Education and Demonstration |
| We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc. Our facilities are also available for designing and building action displays for museums and electrical demonstrations. | |
We Will Buy Your Used or Surplus High Voltage Equipment
|
|
|
You may contact us or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
|
|
|
|
|
|
|
|
|
Email: Sales & Orders | Email: Tech Support |
|
PO Box 716, Amherst, NH 03031-0716 |
|