Paranormal Detectors
Home | New Products | Gift Ideas | Plans | Policies | Contact Us
Transformer/Coil Manufacturing | Engineering & Design Services
To order: click the ITEM NUMBER
to add to your shopping cart
|
|
Paranormal DetectorsHome | New Products | Gift Ideas | Plans | Policies | Contact Us Transformer/Coil Manufacturing | Engineering & Design Services |
To order: click the ITEM NUMBER
|
Research and investigation into the unexplained paranormal world has often been questioned due to the difficulty in obtaining reliable and repeatable data. Many known investigators and researchers were sought after and handsomely paid for their efforts to make some type of contact with the afterlife. Their inability to make tangible or real contact with the target subject became frustrating to them and their clients. They often had to resort to clever trickery with many practitioners becoming known as charlatans. True psychics and legitimate investigators still had difficulties to overcome, such as unexplained phenomena being dismissed as unrelated to the event. This was primarily due to the lack of equipment to quantify and analyze these mysterious and unexplained events.
The paranormal world must follow some of the physical laws and properties of the known universe. This does not have to be 100%, as there is still much to learn of the cosmos that can still shatter a few accepted laws of creation and death. To this end, we have developed several detection systems that have the ability to detect the presence of non-localized phenomena as that of very weak magnetic distortions, warping electric fields, thermal energy, gravitational anomalies, light and shadow variation and unexplained sonic pressure waves.
Much of the otherwise undetectable phenomenon has often been present in paranormal activity. Strange and unexplained readings on our detectors have been known to accompany these paranormal events both before and after, allowing extended time for analysis and correlation. Areas where psychic activity is known to be present can often be verified by the use of these ultra-sensitive detectors.
These products are low cost and have been proven to be quite effective in paranormal research. Each is capable of detecting ultra low levels of non localized forces. Our labs are also developing a mass warp gravity detector for this field and other applications.
|
Ion, Charge and Electric Field DetectorALL NEW IOD40 detects both positive and negative electric fields produced by ions, ultra low static fields, lightning, paranormal entities and other associated phenomona.This very versatile tool detects both positive and negative electric fields produced by ions, and ultra low static fields This unit is sensitive enough to detect the minute charge produced by just rubbing a piece of plastic and bringing the probe in proximity. It easily measures the electric field during a thunder storm or other high static conditions long before the storm arrives. Extremely useful for mapping the electric fields associated with high voltage generators. Indicates dangerous "E" fields that may damage sensitive electronic circuits or components. Detects those that can be dangerous to personnel. Detects the presence of weak to strong static charges from lightning, potential corona points and output of ion generators, leaking high voltage insulators and wiring insulation. A very valuable device for the high voltage researcher and experimenter. Unit is built into a handheld 6” x 3” x 1.5” metal box with extendable detection antenna probe. Simple high performance circuitry is powered by a single 9 volt battery that seldom needs replacement. Detector indicates field strength using an analog meter with a sensitivity control. Includes a potential dangerous high charge field condition by an indicating LED. Switch selects positive or negative charge fields. A response switch allows fast or slow response. A simple external terminal provides a connection point for a grounding lead. Front-mounted RCA phono jack provides a facsimile out for remote monitoring or trigger circuitry for alarms, x/y recorder, etc. It has been observed that certain paranormal activity is often accompanied by a distortion of the electric field. These changing fields are usually too weak to be detected by conventional detectors. The IOD40 has on several occasions detected unexplained fields in coincidence with other events. At the time of this writing a study is being done at several selected grave sites to see if the distortion in these weak fields can be detected and correlated with other unexplained events.
|
Battery operated directional device indicates small changes in the thermal fields that sometimes accompany stationary and moving paranormal phenomena. This unit can detect the heat left by your handprint when removed from the contacted surface for several minutes. Activity is noted via an alarm or flashing lamp on the panel. A sensitivity control allows adjustment of the meter range. Unit detects moving and stationary activity.
Range of human detection on a cool night is well over 200 meters. (Long range application requires the unit to be mounted on a video tripod or the like.) The unit produces an audible tone and LED visual indicator to alert the user of activity. The rear panel contains all controls and jack. The handle section contains the 8 aa batteries with a slip on removable cap. A 1/4-20 threaded hole in the main enclosure allows easy attachment to a vide tripod.
A special output jack is available that provides the actual detected facsimile signal before the window comparator trigger. This can be fed to a scope, volt meter or other indicator for determining relative levels of signal strength.
|
|
Head 
Control Box |
Battery operated two-part non-directional device indicates small changes in the magnetic fields that sometimes accompany moving paranormal phenomena and other strange and unexplained entities.
This unit can detect magnetic distortions as slight as those made by waving a piece of non magnetic material in the vicinity of the detector head section. Activity is noted via an alarm or analog meter on the front panel. A jack is included to interface with an external X/Y recorder. A sensitivity control allows adjustment of the meter range and alarm threshold. The head consists of a special permendum alloy wound coil. A built in pico-amp amplifier uses two AA batteries to power the circuit, which will last for years before requiring replacement. The detection circuit is so sensitive that the meter movement in the control box causes magnetic interaction. Therefore separation is required between the head and body to prevent erroneous readings. Permanent installation where the weather-resistant head may be mounted on a sturdy pole away from anything electrical or large amounts of iron, preferably in a quiet place out of the wind. A shielded cable can now be run to the control box.
Permanent installations are suggested for:
Temporary installations can be made by placing the head on a sturdy video tripod and placing the control box in any convenient location. This method is preferred in the evaluation of paranormal and “the unexplained” target areas.
Specifications and controls
|
MGD1 - Plans (By Download - $4.00) ......................................$10.00
MGD1K - Kit/Plans .....................................................................$199.95
MGD10 - Magnetic Field Detector, Ready to Use .................$349.95
Hear The Incredible World Of High Frequency Sounds - Beyond That Detectable By The Human Ear! Hears Ultrasounds and Rejects Normal Sounds
Pinpoint Those Annoying Sounds Coming From Animal Repellers, and Those Who Might be Purposely Using Ultrasounds Against You for Harassment
|
Battery operated directional device detects sounds beyond the range of human hearing, with narrow band tuning from about 23 to 27 kHz (-3db points), allowing you to hear and pinpoint mechanical, electrical and biological sounds such as leaking gases, air, corona, motor frictional noises; bats, insects, and other sounds of mother nature -- even beading water! Unexplained sounds have been detected but unfortunately only limited research is available to analyze their meaning.
This device is not made to hear sounds that the human ear can normally perceive, but instead it will hear ultrasound beyond the range of human hearing. (To amplify normal sounds, please see our other devices, such as the Cybernetic Ear, TurboEar, Parabolic Bionic Ear, Parabolic Microphones, and Shotgun Microphones.) Included headsets may be different from those shown in picture.
HT9 - Plans (By Download - $4.00) ..............$10.00
|
Battery operated directional device indicates small changes in the light levels often attributed to paranormal activities. Unit contains a sensitivity control, audible and visual alarms.
DARK10 - Darkness and Shadow Detector, Ready to Use ........$99.95
|
Radiant Energy Probe
and E-Field Detector 
ENPROBE10 - Assembled ......$34.95 |
Probe detects E fields produced by electrical activity and other unknown anomalies. Unit uses no batteries or other sources of power yet detects very weak and virtually un-noticed energy fields. Unit can also provide a three dimensional output "footprint" of medical healing machines such as LAKHOVSKY coils, High voltage generators, Ion machines, Dangerous lightning levels, Power line E field gradients, High frequency radiation from TESLA coils and similar devices. This probe is used by paranormal researchers as seen on some TV shows.
This device is for detecting strong E fields, like those from plasma globes, tesla coils, ion generators, etc. It is not intended for weak E fields, like those generated by many household items. If you need something to detect household or weaker energy fields, we suggest our IOD10. The apparatus is electrically balanced and designed in the shape of a wand with a 2 inch brass sphere at its detecting end. The handle is 1” OD x 9” of treated polycarbonate with plated metallic tape wrapped around the ends. A red neon indicator lamp (a standard bulb that should last for years, but can easily be replaced if needed) flashes upon detection and increases as you get closer to the source, or if the source gets stronger. This handy unit is easy to use and can check the validity of output energy of various healing machines and other radiating products. It is a must-have product for those working in these energy fields.
|
|
|
|
Email: Sales & Orders | Email: Tech Support |
|
|
PO Box 716, Amherst, NH 03031-0716 |
|
