Ion Ray, Charge Guns
Home | New Products | Gift Ideas | Plans | Policies | Contact Us
Transformer/Coil Manufacturing | Engineering & Design Services
To order: click the ITEM NUMBER
to add to your shopping cart
|
|
Ion Ray, Charge GunsHome | New Products | Gift Ideas | Plans | Policies | Contact Us Transformer/Coil Manufacturing | Engineering & Design Services |
To order: click the ITEM NUMBER
|
Your ion ray gun and ion motor demonstrates an interesting phenomenon involving the mobility of charged particles. It is capable of producing the following effects:
|
|
Conduct Many Bizarre And Interesting Experiments!
Click here for Experiment Examples
This series of ion ray and force field gun utilizes a self oscillating circuit with a current controlled transformer. The circuit produces a 7 to 9kv high frequency output voltage and an over current shutdown for safety when used in certain experiments as shown. The oscillator output is fed to a full wave voltage consisting of a number of stages that convert and multiply the peak value of the voltage waveform. Output resistors help control the high capacitive discharge currents that could damage the multiplier section. The circuitry is housed in a 1- 5/8" od length of plastic tubing. A 6" length is attached to the main housing to provide a butt handle like a hand gun. This section houses the 8 "AA" battery cell holder and has a strip of conductive metal tape to make contact to the users hand. This forces the users body to the system ground and provides a virtual ground for charge return. A simple push button switch controls power to the device.
Unit is housed in a combination gray PVC and clear plastic tubing enclosing the multiplier section. Controls are safety switch and charge field intensity adjustment with push button power control mounted in the pistol grip butt. This section also houses the 8 "AA" battery cell holder and has a strip of conductive metal tape to make contact to the users hand. This forces the users body to the system ground and provides a virtual ground for charge return. Unit is ruggedly built and can be hazardous if used incorrectly. Labeled dangerous.
 |
IOGHP1 - Plans (By Download - $5.00) ......................................$15.00
IOGHP1K - Kit/Plansof 15 Stages - 100 kv Plus/Meter ...........$189.95 IOGHP10 - Ready to Use Positive Output .................................$259.95 (Negative output on request.) |
Lower Cost / Lower Power UnitsLow Power ModelIOG3 - Plans Only (By Download - $3.00) ...........................$5.00 IOG3K - Kit/Plans of Mini Model - 35 kv/m .........................$59.95
Higher Power Model
|
|
 IOG90 Shown |
IONMOT1 - Plans (By Download - $3.00) ....................$6.00
IONMOT1K - Kit and Plans ...........................................$49.95
IONMOT10 - Ready to Use ...........................................$69.95
IONMOT10NEG - Ready to Use (negative ions)........$79.95
12DC/1.5 - 12V 1.5A Wall Adapter for IONMOT10 ....$15.95
|
Ion, Charge and Electric Field DetectorALL NEW IOD40 detects both positive and negative electric fields produced by ions, ultra low static fields, lightning, paranormal entities and other associated phenomona.This very versatile tool detects both positive and negative electric fields produced by ions, and ultra low static fields This unit is sensitive enough to detect the minute charge produced by just rubbing a piece of plastic and bringing the probe in proximity. It easily measures the electric field during a thunder storm or other high static conditions long before the storm arrives. Extremely useful for mapping the electric fields associated with high voltage generators. Indicates dangerous "E" fields that may damage sensitive electronic circuits or components. Detects those that can be dangerous to personnel. Detects the presence of weak to strong static charges from lightning, potential corona points and output of ion generators, leaking high voltage insulators and wiring insulation. A very valuable device for the high voltage researcher and experimenter. Unit is built into a handheld 6” x 3” x 1.5” metal box with extendable detection antenna probe. Simple high performance circuitry is powered by a single 9 volt battery that seldom needs replacement. Detector indicates field strength using an analog meter with a sensitivity control. Includes a potential dangerous high charge field condition by an indicating LED. Switch selects positive or negative charge fields. A response switch allows fast or slow response. A simple external terminal provides a connection point for a grounding lead. Front-mounted RCA phono jack provides a facsimile out for remote monitoring or trigger circuitry for alarms, x/y recorder, etc. It has been observed that certain paranormal activity is often accompanied by a distortion of the electric field. These changing fields are usually too weak to be detected by conventional detectors. The IOD40 has on several occasions detected unexplained fields in coincidence with other events. At the time of this writing a study is being done at several selected grave sites to see if the distortion in these weak fields can be detected and correlated with other unexplained events.
|
|
Radiant Energy Probe
and E-Field Detector 
ENPROBE10 - Assembled ......$34.95 |
Probe detects E fields produced by electrical activity and other unknown anomalies. Unit uses no batteries or other sources of power yet detects very weak and virtually un-noticed energy fields. Unit can also provide a three dimensional output "footprint" of medical healing machines such as LAKHOVSKY coils, High voltage generators, Ion machines, Dangerous lightning levels, Power line E field gradients, High frequency radiation from TESLA coils and similar devices. This probe is used by paranormal researchers as seen on some TV shows.
This device is for detecting strong E fields, like those from plasma globes, tesla coils, ion generators, etc. It is not intended for weak E fields, like those generated by many household items. If you need something to detect household or weaker energy fields, we suggest our IOD10. The apparatus is electrically balanced and designed in the shape of a wand with a 2 inch brass sphere at its detecting end. The handle is 1” OD x 9” of treated polycarbonate with plated metallic tape wrapped around the ends. A red neon indicator lamp (a standard bulb that should last for years, but can easily be replaced if needed) flashes upon detection and increases as you get closer to the source, or if the source gets stronger. This handy unit is easy to use and can check the validity of output energy of various healing machines and other radiating products. It is a must-have product for those working in these energy fields.
|
High Voltage Engineering Design Services |
High Voltage Design for Research, Trade, Education and Demonstration |
| We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc. Our facilities are also available for designing and building action displays for museums and electrical demonstrations. | |
We Will Buy Your Used or Surplus High Voltage Equipment
|
|
|
You may contact us or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
|
|
|
|
|
|
|
|
Email: Sales & Orders | Email: Tech Support |
|
|
PO Box 716, Amherst, NH 03031-0716 |
|